3-D Solder Paste Inspection
checks form, height, surface area, bridges, volume, x/y offset and coplanarity of solder.
-
Product
Fiber Inspection and Cleaning
-
Dust - just because you can't see it doesn't mean it's not there. A 1-micrometer dust particle on a single-mode core can block up to 1% of the light (a 0.05dB loss). The only way to know it's clean is to inspect it before you connect it. And if it's dirty, it needs to be cleaned with the right tools or you might just make it worse. Know it's clean with our cleaning and inspection tools.
-
Product
Substrate Inspection Apparatus
-
The test system of the printed circuit board (mounting board) called the flying probe tester developed ahead of the world received high evaluation at the electronics manufacturing factory around the world, securing the top share of the industry and "Takaya of the board tester" We have established a firm position that.
-
Product
Benchtop 3D Optical Profilometers
-
Compact, non-contact metrology instruments used for high-precision, sub-nanometer to micrometer-level measurement of surface topography, roughness, and step heights.
-
Product
ATD 3D Layout Machine
-
ATD Model is consisted of 2 main body and one cast iron surface plate for marking work and 3D measruing.
-
Product
Cylinder Inner Wall Inspection
-
The CylinderInspector is an optical, non-destructive inspection and measurement tool for cylinder surfaces.
-
Product
Connector, 104-Pin D-Type Male, Solder Bucket, 5A
40-960-104-M
D-Sub Male Connector
This 104-pin male D-type connector allows users to create their own cable assemblies. Cable connection is via solder buckets - supplied with rear cable entry backshell.
-
Product
Optical Inspection System
OIS Products
-
A manual optical inspection system that is able to inspect the wire-bonded leadframe or substrate.
-
Product
ROBOT-MOUNTED OPTICAL CMM 3D SCANNERS
METRASCAN-R
-
Part of the MetraSCAN 3D line-up, the robot-mounted MetraSCAN-R optical CMM 3D scanning systems are fast and accurate scanning solutions designed for 3D automated inspection of parts on the production line and on the shop floor. In combination with industrial robots, the MetraSCAN-R series increases the reliability, speed and versatility of on-line inspection and quality control (QC) process.
-
Product
3D Acceleration Logger Sensor
NUL-227
-
This is a 3D (three dimensions) acceleration sensor which displays each dimension one at a time. It allows measuring the acceleration of moving bodies such as a body oscillating in a spring or in a moving vehicle.
-
Product
Solder Test Pallet
WaveRIDER® NL 2
-
The wave soldering process is one of the most challenging procedures to set up. The ECD WaveRIDER NL 2 greatly simplifies wave solder set up and ensures perfect repeatability, time after time. Board recipe preheat temperatures, conveyor speed, wave height, contact times and parallelism are all measured and monitored using the WaveRIDER NL 2 process pallet.
-
Product
3D Scanning Software
-
Software is a comprehensive component to any advanced metrology system. Combined with laptops and portable equipment, 3D scanning and measurement is now possible virtually anywhere. 3D scanner software plays a critical role in every stage from the creation of a concept design to the manufacturing and inspection of prototypes. Below is a look at some of the Laser Scanner Software and 3D Scanner Software providers and platforms we represent and handle.
-
Product
Inspection Systems
-
Video Inspection Systems with?or without measurement capabilities are an excellent way to evaluate and test small items or items in?difficult to access locations. Many options are available in addition to the measurement capability. Video Inspection is used for a variety of purposes including the ability to see? and measure items that are much smaller than the eye can see or that hand tools can measure. Video systems can also reduce the eye and/or back strain associated with production environments where an operator must look in a microscope all day.
-
Product
Testing And Inspection Devices
-
HEIDENHAIN offers testing and inspection devices that deliver all setup, monitoring, and diagnostic data needed for the analysis of its encoders. Grid encoders from HEIDENHAIN are ideal for machine tool inspection and acceptance testing, accurately measuring CNC machine tool movements in both static and dynamic inspection.
-
Product
Inspection scope
KI-TK1012
-
Inspection scope & cleaning materials. Interchangeable MPO SC LC connectors
-
Product
3D Profile Sensor
Z-Trak2
-
Z-Trak™2 is a new family of 3D profile sensors built on Teledyne Imaging’s 3D image sensor technology, ushering in a new era of 5GigE 3D profile sensors for high-speed, in-line 3D applications.
-
Product
Inspection Assist Software
-
RVI software is a must for streamlining your inspection processes and improving overall efficiency. Olympus inspection assist software provides support throughout the entire process, whether streamlining on-site inspections or assisting with remote report generation.
-
Product
Ground Resistance Inspection Box
-
AllWin Instrument Science and Technology Co., Ltd.
Check the ground resistance tester each time prior to start work everyday morning and do some relevant records.
-
Product
Protective Coating Inspection
Kit 5
-
A more comprehensive kit than kits 1-4, the Elcometer Protective Coatings Inspection Kit 5 expands the range of instruments available to the protective coatings inspector.
-
Product
Articulating Inspection Cameras
-
Articulating Inspection Cameras with probes whose tips can be precisely turned (articulated) by the user up to 150 in two directions. Articulation enables inspection of targets located off-axis (even "behind" the probe) or in a tight space without removing the probe. The Inspection Cameras currently offered include the DCS16HPART, its wireless cousin the DCS18HPART, and the DCS665-ART Articulating Inspection Cameras.
-
Product
3D SPI Series
MS-15
-
- Exclusive 15MP / 25MP CoaXPress Camera System- Dual Projection Shadow Free Moiré Technology- Precision Compound Telecentric Camera Lens- Automated Z-Height Calibration System- Automated PCB Under Board Support System- Precision PCB Warpage Compensation- Closed Loop Communication With Screen Printer- Absolute Repeatability and Reproducibility- INTELLISYS® Industry 4.0 Intelligent Factory Automation System
-
Product
Over-Line Vision Inspection System
-
Over-Line vision inspection systems utilize a compact sensor head mounted directly over an existing production line to scan every object that passes underneath, in any orientation and at any belt speed, in order to generate a continuous stream of critical QA data, such as size, shape and color attributes, and production metrics such as throughput, uptime and capacity.
-
Product
160-Pin DIN41612 Connector, Solder Pin, Male
92-960-160-M
DIN41612 Male Connector
Suitable for users to create their own cable assemblies, this product can be supplied with or without the backshell. For applications in LXI products where 4 connectors are used in a horizontal row if the user requires all connectors to have a second fixing then the connector can be fitted with an optional screwlock assembly.
-
Product
Inspect & Explore Indoor and Confined Spaces
ELIOS
-
Discover the first collision-tolerant drone, designed for the inspection and exploration of the most inaccessible places. Allowing for the first time to fly in complex, cluttered or indoor spaces, Elios unleashes the potential of UAVs in numerous applications where their use was previously too dangerous or simply impossible.
-
-
-
Product
3D Machine Vision Process Control Solutions
-
In the age of automation and robotics, manufacturers utilizing automated dispensing in their assembly lines face growing challenges to maintain process control of their manufacturing processes. To eliminate errors and optimize product quality, they increasingly need the help of machine vision based “eyes of automation”. Whether manufacturing automobiles or medical devices, they need high-speed inspection tools to confirm the accuracy of their dispensing process and the overall quality of their products.
-
Product
3D Point Cloud Data Viewing, Cleaning, Editing, Leveling, and Alignment Software Package for BV5000 3D Data Processing
QuickStitch Powered by EIVA
-
QuickStitch is an easy-to-use 3D point cloud data viewing, cleaning, editing, leveling and alignment software package designed specifically for BV5000 3D data processing. The intuitive controls and user interface allows operators to quickly learn cleaning and alignment techniques. QuickStitch provides customers a fast and simple way to produce clean and aligned data sets to their customers.
-
Product
Probes for Tube Inspection
-
Probes for tube inspection are lightweight but solidly constructed eddy current, remote field, magnetic flux leakage, and IRIS ultrasound. These probes are used for ferromagnetic or non-ferromagnetic tube inspection applications.
-
Product
3D AOI with Revolutionary New 3D Measurement
Zenith
-
The Zenith 3D AOI system measures the true profilometricshape of components, solder joints, patterns and even foreignmaterial on assembled PCBs with true 3 dimensional measurement, overcoming the shortcomings and vulnerabilities of 2D AOI.
-
Product
3D Ground Penetrating Radar data processing & Interpretation software
Condor
-
Condor is modern processing, visualisation and interpretation software for the efficient management of Raptor 3D GPR array data.Boost performance and improve workflows.- Efficient sub-surface imaging- Effective workflows- Simple and intuitive- Dedicated to processing Raptor data- Modern Windows software (64-bit)
