Product

Probe Station

EPS300

-

ECOPIA

EPS300 - ECOPIA

Reasonable price and compact design. - Sellectable chuck size : 4inch, 6inch, 8inch when ordering probe station. - Hot chuck can be installed. Temp range: RT ~ 300°C - Hot and cool chuck from 0 °C ~ 300 °C can be provided.

Product

Capacitance Detection Probe

Which Ender

-

Cirris Systems Corporation

Which Ender - Cirris Systems Corporation

By sensing capacitance the Which Ender identifies if a wire is connected to a contact. When the Which Ender's button is pressed, a tone is produced. If a contact is connected to a wire, this tone will drop in pitch when the probe tip touches the contact. The Which Ender is essential for locating opens, breaks, and unused pins in connections.

Product

MANUAL TEST FIXTURE KITS

SERIES 5590

-

Test-X Fixture Products

SERIES 5590 - Test-X Fixture Products

Built with unique design features: Ease of assembly and disassembly All side panels are removable Side panel material is delrin for easy machining for connectors, switches etc.Light weight and durable construction2" Between Probe plate and lid plate allowing more room for tall board components

Product

Multiparameter Water Quality Probe

Model GEO-AQUpro

-

Geónica, S.A.

Model GEO-AQUpro - Geónica, S.A.

Up to 11 sensors (9 + temperature and pH ref) from the following list: Temperature, Optical Dissolved Oxygen, Specific Conductance, Salinity, Total Dissolved Solids (TDS), pH, ORP, Depth, Turbidity, Chlorophyll a, Rhodamine, Blue-Green Algae, CDOM / FDOM, Optical Brighteners, Tryptophan, Fluorescein, Refined oil, Crude oil, Ammonium, Nitrate, Chloride, Sodium, Total Dissolved Gas (TDG), up to 5 User Configurable Parameters (calculated e.g. TSS).

Product

18 GHz Differential TDR/TDT Probe Kit

N1021B

-

Keysight Technologies

N1021B - Keysight Technologies

Connect PCBs and other devices without connectors to TDR/TDT modules in the oscilloscope mainframe

Product

Retractable Cable

3700

-

Peaceful Thriving Enterprise Co Ltd

3700 - Peaceful Thriving Enterprise Co Ltd

*2 x 6m retractable test leads.*Used as an extension cord for cars, trailers, boats and more.*Optional accessory included alligator clips, test probes and banana plugs.*The tester can be used with any multi meter or device equipped with banana jack connectors.

Product

Model PS-1

16820-100

-

M. C. Miller Company

16820-100 - M. C. Miller Company

The Model PS1 under tank probe is designed to be used in conjunction with customer-supplied ¾” National Pipe Thread (NPT) PVC piping and the product has a ¾” (NPT) threaded end that accepts a standard coupling. Any number of pipe pieces can be combined via couplings to provide the required probe insertion length under a tank. The probe can be combined with any standard reference electrode with a ¼ x 20 threaded fitting, including the RE-5, RE-5C and RE-7 portable reference electrodes. Reference electrodes are sold separately. The sealed cable to be fed through a customer-supplied PVC pipe comprises #16 AWG wire with red colored PVC insulation and the wire length can be selected via the radio buttons in the field below.

Product

Ultra High 2.84 (81.00) - 10.00 (283.00) High Performance Lead Free Probe

LFRE-1H-10

-

ECT

LFRE-1H-10 - ECT

Current Rating (Amps): 6Average Probe Resistance (mOhm): 10Test Center (mil): 75Test Center (mm): 1.91Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 500,000Mechanical Life Remark: *Ultra High force products may observe slight decrease in cycle life.Overall Length (mil): 1,300Overall Length (mm): 33.02

Product

Beam Probes

-

Macken Instruments, Inc

Macken Instruments, Inc

The CO2 Laser Beam Probes are hand-held plates designed to simplify the alignment of IR optical systems. They display the laser beam as a dark image on a fluorescent background using the same UV-excited, thermal-sensitive surfaces developed for Macken Instruments'' Thermal Image Plates.

Product

Insulation Resistance Meter

1503

-

Fluke Corporation

1503 - Fluke Corporation

The Fluke 1503 is a great choice for basic residential and commercial electrical insulation testing. This rugged, compact tool fits in the palm of your hand. The 1503 is the same form factor as the Fluke 1507 but with a few less features. You can count on it to handle the most common tests at a most affordable price. Additional features, like the remote probe, reduce the time needed to perform repetitive testing.

Product

High Voltage Probes

-

North Star High Voltage

North Star High Voltage

High voltage measurements have a variety of different requirements, and our PVM series and VD series probes are designed for most of these requirements. The PVM probes are designed for wide bandwidth and ease of portability where a variety of measurements must be made. The VD series probes are designed for use at higher voltage ranges, and where physical stability is required.

Product

Resistivity Meters

SSR-MP-ATS

-

Integrated Geo Instruments & Services Private Limited

SSR-MP-ATS - Integrated Geo Instruments & Services Private Limited

The instrument design incorporates several innovative features and advanced techniques of digital circuitry to make it a reliable Geophysical tool providing high quality data useful for mineral and groundwater exploration and any other Geophysical applications. The SSR-MP-ATS sends the entire current into the ground without wasting power for constant current generation thus increasing the signal strength to probe deeper layers.

Product

Combined RH and Temperature probe

HP3217R

-

Senseca

HP3217R - Senseca

Combined temperature and relative humidity probe. Capacitive RH sensor, Pt100 temperature sensor.

Product

ElcoMaster Oven Profiling Software

-

Elcometer Limited

Elcometer Limited

*Oven Logger set up & programming*Paint/Powder parameter library*Product probe maps*Fully customisable inspection templates*Selectable probe/channel traces*Statistical analysis by probe/channel*Max, Min, standard deviation, coefficient of variation*Temperature profile, cure progress, histogram & individual cure value graphs against product*Time at temperature, time of peak difference*Time above maximum absolute & minimum cross link temperatures*Fully customisable inspection reports*Combined reports - coating thickness, gloss, adhesion, profile, climate, surface cleanliness*Report generator wizard & PDF generator*Email or export data*Import photo’s, data sheets, critical data, inspection notes, etc & include on inspection reports*Cloud computing - allows for cross site collaboration, including internal text messaging tool*Overlay temperature profiles, review and compare multiple oven profiles over time*Use additional data loggers for multiple channels or run overlays

Product

Color Probe

AS56-F

-

optek

AS56-F - optek

AS56-F is a probe for direct installation into pipelines and vessels measuring VIS light absorption of various liquid samples. Optical path length can individually configured to meet the process control requirements.

Product

Fully Automatic 4 Point Probe Sheet Resistance System For Semiconductor Process Evaluate

WS-3000

-

NAPSON Corp.

WS-3000 - NAPSON Corp.

*Automatic probe head selection(exchanger) among 4 kinds of probe head*[No need to exchange a probe head by each different sample measurement]*Edge 1mm measurement is available by dual meas. mode*High cost performance from high speed measurement*FOUP compatible, GEM / SECS compatible

Product

LED View Angle Tester

-

WeiMin Industrial Co., Ltd.

WeiMin Industrial Co., Ltd.

360°rotate perspective die scanning.0.36° as the smallest test step unit.Conjunction with LED tester for electrical and optical parts test.Test data collection and perspective diagram drawing.Support 4 sets of probe socket (standard equipment with 2 sets of probe sockets)Clip structure. Easy for die positioning.

Product

4 Moving Probe Tester

L Series E4L6151

-

MicroCraft K.K.

L Series E4L6151 - MicroCraft K.K.

This is the latest EMMA series affordable model that offers low damage, high-speed and high-accuracy test. Max. Test Area 24 x 20" (610x510mm). Number of Probes 2 Front, 2 Rear. Min. Pad Pitch *1 0.007087" (180µm). Min. Pad Size *2 0.00314" (80µm).

Product

Custom solutions

-

NOVACAM Technologies, Inc.

NOVACAM Technologies, Inc.

Novacam develops custom interferometric solutions to address particular inspection and imaging needs of specialized applications and OEM markets. Our modular interferometer components offer a superior and cost-effective platform for developing high-performance systems and assemblies. We will collaborate with your application experts to devise the optimal combination of inteferometric (OCT) hardware, non-contact fiber-based sensor probes, and system software.As needed, Novacam engineers: develop customized optical probes and inspection stations develop inline probe fixtures for production environments adapt Novacam standard interferometer component modules to suit your application help integrate Novacam systems or components with third-party tools write customized software