Product

Universal Measuring Device For Magnetic Fields

Teslameter M-Test MK4

-

Maurer Magnetic AG

Teslameter M-Test MK4 - Maurer Magnetic AG

The M-Test MK4 precisely detects and measures static or dynamic magnetic fields. The ~ 1 mm thick tangential probe allows precise, punctual measurements in hard-to-reach places, air gaps or on surfaces. The M-Test MK4 is particularly suitable for measuring permanent magnets or small ferromagnetic parts.

Product

High Voltage Differential Probe

DP750-100

-

Shenzhen Micsig Instruments Co., Ltd.

DP750-100 - Shenzhen Micsig Instruments Co., Ltd.

*The leads and probe are with shielded design, interface ends are integrated in a compact box, no need to twist the cables, leads to a lower noise floor and has less interference. *Support one-press Zero calibration and automatic overrange alarm.*Directly powered by Micsig UPI interface, realise auto scaling setup, can also powered by oscilloscope via USB cable.

Product

PRO Waterproof pH & Temperature Tester

pH55

-

Milwaukee Instruments

pH55 - Milwaukee Instruments

The Milwaukee Waterproof pH55 PRO pH/Temp. Tester is one of our most accurate cost effective, well rounded, rugged and reliable testers in the market featuring dual level LCD readouts, easily replaceable probe and extended pH ranges to meet almost any application. It's simple 1 or 2 point automatic calibration is simple-to-use and offers TWO sets of memorized buffers to select. Ideal for use in aquariums, hydroponics, horticulture, education, pools, beer and many other applications.

Product

Compressed Air RH+T+Tdp Sensor

T3111P-4

-

COMET SYSTEM, s.r.o.

T3111P-4 - COMET SYSTEM, s.r.o.

Relative humidity, temperature sensors at probe on the cable. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy.

Product

Mobile Cable Fault Location System

BAUR Syscompact 4000

-

BAUR

BAUR Syscompact 4000 - BAUR

Fault location with Syscompact 4000. The Syscompact 4000 is a compact, fully enclosed fault location system for pre-location and pinpointing of high-resistive, low-resistive and intermittent faults on low- and medium-voltage cables. Easy operation and the use of latest fault location methods enable fast and safe fault location.* Location of low-resistive, high-resistive and intermittent cable faults* Efficient cable fault pre-location methods* Pinpointing according to the noise location method or acoustic propagation time measurement* (with Universal Locator and ground microphone)* Sheath fault location according to the step voltage method (with Universal Locator and two measurement probes)* Easy to handle

Product

Spring Loaded Contacts

-

Harwin Plc

Harwin Plc

ATE Probes, Pogo pins and Contact Pads. Gold-plated, spring-loaded, capable of thousands of cycles. Probes for Automated Test Equipment (ATE). Various height SMT contact pins. Flat SMT contact pads. Spring loaded contacts consist of a plunger (or head), barrel (or body), and a fully encapsulated fine spring, to provide the spring force required to maintain positive contact. All have a high durability, exceeding 10,000 mating cycles.

Product

Penetration Probe

TP473P.O

-

Senseca

TP473P.O - Senseca

Penetration probe with SICRAM module, Pt100 sensor.

Product

Geomagnetometer w/Hall Probe

IDR-321

-

Integrity Design and Reseach Corp.

IDR-321 - Integrity Design and Reseach Corp.

Typical applications: Earth's field vector measurement, air shipment inspection, mapping & recording field perturbations, etc.

Product

Handheld Humidity/Temp Hygrometer

625

-

Edgetech Instruments

625 - Edgetech Instruments

The Model 625 is an ideal instrument for indoor air quality (IAQ) and indoor environmental quality (IEQ) measurements of temperature and humidity. The EdgeTech 625 temp/RH probe can be used two ways: use it as an integrated unit by attaching the probe head to the instrument or connect both parts via a cable. The clear back-lit display can be switched between relative humidity, wet bulb, and dew point at the touch of a button.

Product

Environmental Test Probe, Temperature

72-8364

-

Tenma

72-8364 - Tenma

Type K Surface Temperature Probe Surface probe is ideal for flat stationary surfaces such as molds, heating elements, integrated circuits, transistors and transformers. Very low sensor element mass enables fast response measurement time. Type K thermocouple temperature probes are commonly used with all types of industrial temperature controls and measurement equipment, and are compatible with Tenma handheld thermometers and digital multimeters that include temperature function. All are terminated with standard Type K plugs. See the complete line of Tenma Thermocouple Probes and Accessories

Product

Flexible Pitch GND Fixture Clamps

GF-A

-

High Power Pulse Instruments GmbH

GF-A - High Power Pulse Instruments GmbH

*Compatible with GGB picoprobe model 10 replacement probe tips*<1 ns rise time (200 ps possible with 5 mm GND wire length)*Custom selectable GND wire length 5-15 mm*Gold-coated spring-steel clamp with micro-machined groove for locking of the clamps on the probe tip*High conductivity and low inductance copper HF litz wire with 200 x Ø 0.02 mm strands*Easy to use clamping*Tungsten carbide probe needle with 1 inch length, 15° taper and 7.5 µm tip radius

Product

Threaded Probes Designed for Connector and Harness Test

-

Equip-Test Kft.

Equip-Test Kft.

Equip-Test Threaded Probes Designed for Connector and Harness Test

Product

Electron Probe Microanalyzer

EPMA-8050G

-

Shimadzu Corp.

EPMA-8050G - Shimadzu Corp.

This instrument is equipped with a cutting-edge FE electron optical system, which provides unprecedented spatial resolution under all beam current conditions, from SEM observation conditions up to 1 μA order. Integration with high performance X-ray spectrometers that Shimadzu has fostered through the company's traditions achieves the ultimate advance in analysis performance.

Product

PANELMAP

-

Boin GmbH

Boin GmbH

PANELMAP is a software package used to collect, edit, analyze and visualize measured physical parameters on rectangular semiconductor panels. PANELMAP can import data files from various metrology tools such as ellipsometers, thickness gauges and four point probes. The imported data can then be visualized or printed as line scans, contour plots, 2D or 3D plots or as a histogram.

Product

Professional Remediation Kit

MR176-KIT6

-

Teledyne FLIR

MR176-KIT6 - Teledyne FLIR

Gain a competitive advantage with the advanced, affordable inspection tools in the FLIR MR176-KIT6. This kit includes the MR176, a powerful moisture meter with the flexibility to take either intrusive or non-intrusive measurements, and the E6, the ultimate thermal inspection tool for building, electrical, and mechanical applications. Easy-to-use, rugged, and field-ready, both tools are designed to help you find problems faster and give you that competitive edge. The kit also comes with a hammer/wall cavity probe combo for additional moisture measurement applications.

Product

High-Resolution Scanning Probe Microscope (SPM)

-

Shimadzu Corp.

Shimadzu Corp.

High-Resolution Scanning Probe Microscope (SPM)

Product

CamTrac Z-Axis Test Fixture Kits

CT Serie

-

Test-X Fixture Products

CT Serie - Test-X Fixture Products

The CT Series Mechanical Kits, utilizing the patented CAM mechanism1, offset the same precision linear motion. The 'Z' axis motion is ideal for a larger point count mechanical test applications.The CT Series features a hinged 3/8" FR4 probe board, tooling holes for precision alignment, removable sides, precision shafts and cam slide block assemblies, and a pan latch assembly.

Product

Temperature Transmitter Pt1000

P4121

-

COMET SYSTEM, s.r.o.

P4121 - COMET SYSTEM, s.r.o.

For external Pt1000 temperature probe.

Product

Vector Network Analyzer Extenders

VNAX

-

Virginia Diodes, Inc.

VNAX - Virginia Diodes, Inc.

VDI''s VNA Extenders deliver high performance network analyzer frequency extension into the THz range. Models cover 50 GHz to 1,100GHz with additional bands in development. VDI modules come in a variety of form factors and configurations including our original Standard-size Modules and new Mini Modules that reduce volume up to 75%. In addition to our full Transceiver (TxRx) modules, VDI also offers Transmit-Reference (TxRef) modules and Receive only (Rx) modules that deliver optimized performance for specific applications. These modules combine high test port power and exceptional dynamic range to deliver industry leading performance. They are compatible with most network analyzers and can be integrated into probe stations and antenna chambers.

Product

Electromagnetic Radiation Analyzer

SEM-600

-

Beijing KeHuan Century EMC Technology Co,.LTD

SEM-600 - Beijing KeHuan Century EMC Technology Co,.LTD

Broadband Electromagnetic Radiation Analyzer SEM-600 can accurately measure various complex electromagnetic environments. The probe covers all frequencies from low frequency to microwave radiation. It can measure electric field strength and magnetic field by equipping different types of probes. Intensity (magnetic induction) and power density, it is also equipped with ordinary probes and other weighted probes based on human safety standards.