Product

CMP Mechanical Kits

-

Columbia Elektronik AB

Columbia Elektronik AB

The CMP Mechanical kits are an excellent option for manual tests of both low and high volumes. Now in a more rigid design with removable probe plate for easier maintenance. Integrated fixture down switch as an option. The kit is available in 4 standard sizes but can be adjusted to your demands.

Product

Precision Flying Probe Platforms For Automated Test Applications

-

Huntron

Huntron

Flying Probe technology is used to automate the testing of printed circuit boards (PCB) that would otherwise have to be tested manually. Adding a Huntron Access Prober to your test procedure will significantly decrease test times therefore increasing productivity.Access Probers can accurately place a probe on test points with high accuracy achieved using micro-stepping motors and linear laser encoders. Probing the smallest surface mounted devices is possible. Huntron Access Probers can automate your unique test process using the standard probe or by adding a custom probe of your design. Huntron offers three Flying Probe system configurations based on PCB size and test head requirements.

Product

Thermometer Readouts & Probes

-

Additel Corporation

Additel Corporation

Thermometer Readouts & Probes

Product

Thermalert Clinical Monitoring Thermometer

TH-8/AOP

-

Physitemp Instruments

TH-8/AOP - Physitemp Instruments

The TH-8/AOP is one of our most economical precision thermometers in the Physitemp product line. The TH-8 offers the same high accuracy (0.1°C ±1 digit) and resolution as all our other thermometers, but with a narrow temperature range. The TH-8 has a temperature range 0f -10 to +60°C with 3 probe inputs. The TH-8 is also switchable from celsius to Fahrenheit. The TH-8 is ideally suited for either a laboratory or hospital setting where continuous temperature readings within the physiological range are sufficient.

Product

Constant Temperature Anemometry (CTA) - Hot-Wire Anemometry - Thermal Anemometry

-

Dantec Dynamics A/S

Dantec Dynamics A/S

Constant Temperature Anemometry (CTA), also known as Thermal Anemometry, is a technique for the measurement of turbulence in 1, 2 or 3-dimensional gas and liquid flows, using hot-wire or hot-film probes inserted in the flow. CTA is particularly suitable for the measurement of flows with very fast fluctuations at a point (high turbulence) and the study of flow micro structures, where there is a need to resolve small flow eddies down to the order of tenths of a mm.

Product

DVB-T/T2 Compact Monitoring Probe

EdgeProbe Nano DVB-T/T2

-

TestTree

EdgeProbe Nano DVB-T/T2 - TestTree

With its small, compact and easy to handle design, the EdgeProbe Nano DVB-T/T2 is the ideal tool for field technicians to transport in order to validate and monitor 24/7 all points of a DTV network.EdgeProbe Nano is able to monitor DVB-T and DVB-T2 signals through its RF input (144 x 137 mm compact format).Combined with a Network Monitoring System or not, the EdgeProbe Nano provides a powerful broadcast network alert & diagnosis tool allowing DTV network operators to monitor global trends and anticipate potential failures.

Product

Cable Tester

-

Platinum Tools

Platinum Tools

The MapMaster™ mini detects faults and locations of RJ45 network cables. Good terminations, causes of faults and locations of cables are displayed on an LCD display. A set of five mapping remotes is included for locating cables terminated in wall jacks or patch panels. A built-in tone generator with 4 different tone combinations can be used with a tone probe to detect where a cable is routed and the location of the end of the cable.

Product

Luminance Probe

LP471LUM2

-

Senseca

LP471LUM2 - Senseca

Photometric probe for measuring the LUMINANCE, spectral response according to the photopic curve, angular field 2°.

Product

Logic Analyzers

-

Keysight Technologies

Keysight Technologies

A Keysight logic analyzer helps you minimize project risk by providing the most reliable, accurate measurements and the most complete view of system behavior. This comprehensive family of logic analyzer offers the measurement capabilities, probing, logic analyzer application support and analysis tools to meet your toughest digital debug needs.

Product

Data Logger for Temperature

DSR-T

-

ZOGLAB Microsystem Co., Ltd.

DSR-T - ZOGLAB Microsystem Co., Ltd.

Original medical probe being resistant to low temperature and free of toxicity and halogen Outstanding measuring resolution even in low temperature Original fittings for sensor connection, ensures 100,000 plugs Support single DSR connecting to PC via USB interface, and multiple DSR grouped in RS485 or LAN networking for central management

Product

Conical Laser Power Probes

-

Macken Instruments, Inc

Macken Instruments, Inc

Conical Head Power Probes are used to measure high power density CO2 laser beams which may damage the standard flat surfaced Power Probes. The conical absorbing cavity exhibits a high heat dissipation.

Product

Linear Testfixture (Cassette Not Included), UTT 586 x 248 mm

MG-03

-

MG Products

MG-03 - MG Products

FEATURES• Linear click system with ball bearings, using gas springs• 10 mm ESD-proof top cover with aluminium reinforcement bars• Steel base cabinet with detachable aluminium back and bottom panels• Detachable interchangeable case system with an 8 mm spring loaded probe protection cover• Base cabinet fitted with a telescopic guide rail and catchTECHNICAL SPECIFICATIONS• Max. number of probes (2000N) 1300 units• Max. PCB height: 60 mm• Linear travel: 12 mm• Max UUT: 586 x 248 mm (wxd• Outer dimensions: 750 x 490 x 100 x 170 mm (wxdxh1xh2)• Designed for changeable cassette

Product

AC/DC Current Probe

CP 30

-

GMC-I-PROSyS

CP 30 - GMC-I-PROSyS

The CP 30 current probe has been designed for use with multimeters respectively for accurate, non-intrusive measurement of AC, DC and complex waveform currents.

Product

15k Voltage Probe Set With Hot Sticks

15KVPSet

-

Summit Technology, Inc.

15KVPSet - Summit Technology, Inc.

Our 15KVPSet is a set of three voltage probes that allow direct connections up to 15,000 Vrms (15KV) 3 phase power.

Product

Manual Test Fixture (MA)

MA 2013/D/H/VPC-G12x-18

-

INGUN Prüfmittelbau GmbH

MA 2013/D/H/VPC-G12x-18 - INGUN Prüfmittelbau GmbH

Parallel contact stroke: 15 mmContact force max.: 2000 NInterface block required: NoInterface signals max.: 1700Component on PCB: 58 mmPressure frame unit-opening angle: 75Installation height test probe top: 16,0 mmInstallation height test probe bottom: 10,5 mmInstallation height dual-stage test probe bottom: 16,0 mmweight: 25,00 kg

Product

6kV, 100 MHz High Voltage Differential Probe with Auto Zero Disconnect

HVD3605A

-

Teledyne LeCroy

HVD3605A - Teledyne LeCroy

The HVD3000A series of high voltage differential probes cover the fullest range of applications, from 120/240 V switch-mode power supplies through 600 V class and 5 kV electrical apparatus. The table below provides a list of recommended probe models based on specific device under test applications.

Product

10:1, 10 Mohm, 300 MHz Passive Probe

PP016

-

Teledyne LeCroy

PP016 - Teledyne LeCroy

Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MΩ. This high input resistance means that passive probes are the ideal tool for low frequency signals since circuit loading at these frequencies is minimized. Passive probes are designed to handle voltages of at least 400V, some as high as 600V. Teledyne LeCroy passive probes feature an attenuation sense pin which tells the oscilloscope to scale the waveforms automatically requiring no user input.Each passive probe is recommended for a certain oscilloscope, using the right passive probe with the right oscilloscope means that the probe will be properly compensated across the entire bandwidth. Using probes with a different oscilloscope will only let you compensate for low frequencies.

Product

IGM™ Moisture Meter

FLIR MR160

-

Teledyne FLIR

FLIR MR160 - Teledyne FLIR

Featuring Infrared Guided Measurement (IGM), the MR160 helps you quickly target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings. An integrated pinless sensor and an external pin probe provide the flexibility to take either intrusive or non-intrusive measurements. The MR160 can serve as your go-to troubleshooting tool right out of the box — or as the perfect complement to any high resolution thermal camera you already own.

Product

Strain Measurement In Holes

-

Baumer Electric AG

Baumer Electric AG

Cost-effective force measurement using strain probes.

Product

Field Probe for Electric & Magnetic Field Measurement

WP400-3

-

Wavecontrol, S.L.

WP400-3 - Wavecontrol, S.L.

Wavecontrol presents a new and unique field probe for the measurement of electric and magnetic fields that integrates both E & H sensors within dimensions of only 3 cm². Which makes it unique is that Wavecontrol has managed to add an E field sensor in a basic structure of a classical 3 cm² field probe. It has been possible, therefore, to obtain a 3 cm² field probe without compromising the capability of assessing E and H fields of its 100 cm² big sister, the recognized and successful WP400.

Product

Structure-Borne Sound Probe

T10

-

SONOTEC GmbH

T10 - SONOTEC GmbH

The T10 structure-borne sound probe can be used to monitor the condition of machines, systems and processes, provided that they generate detectable structure-borne sound in the ultrasonic range. Changes in the sound signals indicate a change in the condition and/or process of the plant. The detection of these changes forms the basis for condition monitoring in preventive maintenance. The T10 structure-borne sound probe is used when the installation space is very limited or the test specimen must not be loaded with a large sensor mass. The T10 structure-borne sound probe is also suitable for use on non-magnetic surfaces.

Product

High Voltage Probe

CP-3308R

-

PINTEK Electronics

CP-3308R - PINTEK Electronics

*100:1 scope probe *300MHz Bandwidth *Read out Function *Division Ratio x 100 *100MΩ Fix Input Impedance *1500V DC Working Voltage (CAT Ⅱ) *2000V AC peak to peak MAX. (CAT Ⅰ) *CE Approved.