Product

Standard 1.08 (31.00) - 4.00 (114.00) Long Travel Bead Probe

BPLT-25C-4

-

ECT

BPLT-25C-4 - ECT

Current Rating (Amps): 8Average Probe Resistance (mOhm): 8Test Center (mil): 100Test Center (mm): 2.54Full Travel (mil): 350Full Travel (mm): 8.89Recommended Travel (mil): 317Recommended Travel (mm): 8.05Mechanical Life (no of cycles): 500,000Overall Length (mil): 1,460Overall Length (mm): 37.08Full Travel Remark: Standard Spring: 400 mil / 10,16 mm, Alternate Spring 400 mil / 10,16 mm, High Spring: 400 mil / 10,16 mm, Ultra High Spring: 350 mil / 8,89 mm

Product

450MM 18In Digital Level Bevel Gauge w/ LCD Backlight Screen, Magnets, Level Bubbles, IP54 Standards

DL400

-

Advance Plus Trading Co., Ltd.

DL400 - Advance Plus Trading Co., Ltd.

Model Number: DL400 Key Specifications/Special Features: 450MM 17.7INCH Digital Level with level bubbles, strong magnets,LCD bright backlight display, IP54 standards 1. 450mm 17.7 inch level with 2 bubbles, 450*28*64mm（L*W*H）, net weight: 430g;2. Resolution: 0.05°;3. Horizontal level measuring range: 0 to 360°;4. Accuracy: ±0.3°;5. Measures angle in degrees, IN/FT, mm/m, % slope or pitch;6. Audible tone at level, plump and setting angle;7. Automatic shut-off after 3 minutes;8. Backlight LCD;9. Self checking accuracy;10. Self calibration;11. Hold-function to freeze the measurement;12. Memory recall (9 measurements);13. With strong magnets in the bottom;14. 2pcs high accuracy horizontal & vertical bubbles, clearly to check;15. Operated by DC 3V (2*LR03 AAA 1.5V batteries, not included); 16. IP54 waterproof & dusyproof industrial standard.

Product

Instrument Transformer Calibrators

MRL 22

-

UDEYRAJ ELECTRICALS PRIVATE LIMITED

MRL 22 - UDEYRAJ ELECTRICALS PRIVATE LIMITED

Automatic measure of contact resistance. True 4 terminal measurement. μP operated, automatically saves results.

Product

Standard Voltage 37 Pin D-Type Connector Blocks

-

Pickering Interfaces Inc.

Pickering Interfaces Inc.

The connector blocks and breakouts below are not compatible with Pickering products, however, are offered for developing a connection solution for use with other products.

Product

Calibration Services

-

Process Sensing Technologies

Process Sensing Technologies

for Humidity, Dew Point, Trace Moisture and Temperature Measurement Instruments

Product

Pressure Calibration

-

Calmet Ltd.

Calmet Ltd.

We make pressure calibration easy! All you have to do is hand us over your gauge or meter! We’ll look after the rest, half inch, quarter inch, brass or steel fitting, we have the adapters to make it work.

Product

Electrical Calibration

-

Alliance Calibration

Alliance Calibration

All calibrations include as Found/as Left data, Measurement Uncertainity, Calibration Sticker, Calibration Certificate and online access to calibration data at NO additional charge.

Product

Multi-function Desktop Calibrator

VA730

-

Shanghai Yi Hua V&A Instrument Co., Ltd. CO.,LTD

VA730 - Shanghai Yi Hua V&A Instrument Co., Ltd. CO.,LTD

Multi-function Desktop calibrator DC Voltage/Current Source.

Product

Torque Calibration

-

Alliance Calibration

Alliance Calibration

ISO 17025 Accredited Calibration for Torque Screwdrivers, Torque Wrenches, Torque Multipliers, Torque Transducers, Torque Watches, and Torque Readout

Product

NIST Calibration for D620-A

D620-A-CCNIST

-

Teledyne LeCroy

D620-A-CCNIST - Teledyne LeCroy

- Choice of 4 GHz or 6 GHz bandwidth models- Up to 5 Vpk-pk dynamic range with low noise- ±3 V offset range- Low loading and high impedance for minimal signal disturbance- Ideal for DDR2, DDR3, LPDDR2- Deluxe soft carrying case- Innovative QuickLink architecture- Wide variety of tips and leads-- Solder-In Lead-- Optional Positioner (Browser) Tip-- Quick Connect Lead-- Square Pin Lead-- HiTemp Solder-In Lead

Product

Decade Box, Calibrated W/D & U, Capacitance, 5, 100pF to 11111µF, 5 %

72-7265 CAL DU

-

Tenma

72-7265 CAL DU - Tenma

The 72-7265 CAL DU from Tenma is a capacitance decade box. It is ideal for service, prototype and experimental use. This useful tool may be set at any non polarized capacitor value from 100pF to 11,111µF in 100pF increments. The decade accuracy is ±5% capacitors used throughout at <1μF, 1KHz test frequency, ≥1μF, 100Hz test frequency. It has weight of 304g/0.69lb and dimension is 14.7cm × 11.7cm × 5.5cm (5.79" × 4.61" × 2.16"). It is typically used in general applications, troubleshooting, maintenance, education and vocational training, production line testing, radio and TV services, working standards, research design & develop, physics laboratory work.

Product

Multi-Element Standards

-

Micromatter

Micromatter

These multi-element standards consist of multi-layer thin film coatings, one on top of the other, upto a maximum of 6 elemental coatings. It is generally recommended to have coating thicknesses < 20 µg/cm2, so as to cause negligible notable matrix effects, in particular absorption of X-rays emitted in lower deposits by those covering them.

Product

The Standard R&D Wafer-Lifetime Tool

WCT-120

-

Sinton Instruments

WCT-120 - Sinton Instruments

Best available lifetime measurement accuracy. Measure lifetime and surface recombination for a wafer of any quality or crystallinity.

Product

Insulation Tester Calibrator

DecR

-

Scope T&M Pvt, Ltd.

DecR - Scope T&M Pvt, Ltd.

SCOPE offers High Resistance, High Voltage Decade Resistance Box - DecR. It contains number of smartly configured precision resistors. They are arranged in such a way that user can obtain desired resistance value by selecting appropriate decade switches. DecR is designed using the high quality specially selected resistors. These range of high ohm resistance decades are ideal for variety of applications, having a voltage rating up to 5 kV. It covers the resistance range from 1 kilo ohm to 1 tera ohm. DecR can also be customized as per requirement. DecR is housed in a rugged case and available in 3 / 4 / 6 / 9 decades or in binding post configuration

Product

Calibrator, 0 to 24 mA, Current, 185 mm, 78 mm, 38 mm, ± 0.5%, 265 g

72-6694

-

Tenma

72-6694 - Tenma

*Adjustable 0 to 24 mA current source*Current calibrator drives loads up to 500 Ω*Large LCD display*Sampling Time : Approximately 0.4 seconds*Over Input Indicator : 1*Operating Temperature : 0°C to 50°C ( 32°F to 122°F)*Size : 185 × 78 × 38 mm (7.3 × 3 × 1.5 inches)*Weight : 265 g (0.58 lb) including battery*Requires one 9 V battery - not included*12 month limited warranty *view Terms & Conditions for details

Product

Oscilloscope, Calibrated, 2 Channel, 100 MHz, 1 GSPS, 25 kpts, 3.5 ns

72-8710A CAL

-

Tenma

72-8710A CAL - Tenma

The 72-8710A CAL from Tenma is a digital storage oscilloscope with 100MHz bandwidth, 2 analogue channels. The digital storage oscilloscope provides a complete set of trigger modes including edge, pulse, alternate and storage modes including set-up, wave, bitmap. It has a 7 inches wide screen LCD display and supports plug and play USB storage device. Communication with and remote control of computer through the USB device.

Product

Standard Step Tablets, Gray Scales & Density Reference Charts

-

Applied Image, Inc.

Applied Image, Inc.

Standard Step Tablets, Gray Scales & Density Reference Charts are available in a wide variety of patterns, designs and sizes to fit a multitude of today’s application needs. Our gray scales and density patches are measured on a variety of NIST traceable instrumentation, including some of the most sophisticated microdensitometers available to the industry. They are imaged on either Photo Paper (RM) or Film (TM) to function for reflective or transmissive applications.

Product

Custom Optical Components and Standards

-

Applied Image, Inc.

Applied Image, Inc.

With the amount of applications that optical components have, no one could hope to have the perfect component for every possible scenario. For this reason, APPLIED IMAGE makes easy the process of designing, building, and delivering custom components to our customers. Our engineering process is designed to produce the best parts in the industry and more importantly, the best component for your specific needs. The APPLIED IMAGE experience will cover the project with expert engineers from start to finish. Use the form below to start the conversation for checkerboard and dot arrays, stage and image analysis micrometers, reticles and machine vision components.

Product

Pressure Calibrators

-

AMETEK Sensors, Test & Calibration

AMETEK Sensors, Test & Calibration

Our pressure calibrators offer a wide variety of features, accuracies, and pressure ranges. Included are intrinsically safe percent of reading calibrators, reference data recorders, wide-range dual sensor calibrators, and calibrators with built in pressure pumps. Many of our calibrators also offer current measurement, voltage measurement, 24 volt loop power supplies, and even complete systems with pressure pumps and calibration software. In many cases, one handheld calibrator can replace multiple instruments, reducing ongoing recalibration and maintenance costs.

Product

Standard Digitizer

725S Family

-

CAEN S.p.A.

725S Family - CAEN S.p.A.

The 725S family is a digitizer capable of recording waveforms along with performing advanced algorithms for online digital pulse processing (DPP).  Utilizing DPP Firmware, users can acquire quantitative physical parameters (Integrated Charge, Pulse Shape Discrimination with very fine time resolution, Pulse Height Analysis) as well as read out waveforms with automatic pulse identification and baseline suppression on channel basis (Zero-Length Encoding and Dynamic Acquisition Window). The wide range of DPP algorithms supported by the 725S make it a “must-have” for any type of nuclear physics application.

Product

Micro-Ohmmeter Calibration Kit

LOM-530

-

IET Labs

LOM-530 - IET Labs

The LOM-530 is convenient single unit containing a complete set of (5) working standard grade resistors for complete calibration of micro-ohmmeters. The standard resistance values are those used by the LOM-510A Microohmmeter/Milliohmmeter.

Product

Portable Single-Phase Energy Standard

PEWM-3C-1

-

EMSYST Ltd

PEWM-3C-1 - EMSYST Ltd

The single-phase energy standard PEWM-3C-1-1 is used for a quick check on site of all types single-phase electricity meters – for active, reactive or apparent energy, electromechanical and electronic. The voltage and the current are measured at the same time. The current can be measured directly within 10A or 100A range or with current clamp to 100A. The current clamp is electronically compensated.

Product

MultiFunction Calibration

-

Omega Engineering, Inc

Omega Engineering, Inc

Omega offers a large selection of configurable Multi-Channel Meters that accept a wide variety of input signals for scanning, displaying, and logging measured data from multiple sensors.