Product

Multi-Functional and Versatile Probe Tester.

SK-6592

-

Kaise Corporation

SK-6592 - Kaise Corporation

Smart design for easy of use.Pen type DMM useful like a industrial tool.MAX/MIN measurement.Difference measurement.Display hold & Auto power off.

Product

Probe Holders

Model P7

-

Probing Solutions, Inc.

Model P7 - Probing Solutions, Inc.

Made from 300 series stainless steel, the P7 probe holders accept all model 407 replaceable probe tips, and are secured with a set screw. When used with the P7 Tool Holder Adapter Arm; “Z” position adjustments are easy, and can accommodate a variety fixtures and probe card holders. Designed for both high temperature (-65 to 300°C) and high electrical isolation measurements.

Product

Electrostatic Meter

ESM-2

-

ROM-Elektronik GmbH

ESM-2 - ROM-Elektronik GmbH

Our new development, ESM-2 electrostatic meter (successor of the tried and tested ESM-1) measures this alternating voltage via a hand-held probe against ground and displays its value digitally and thus easily readable. If the measured voltage exceeds certain values defined in the "Electrobiological standard", it can be reduced to noncritical values by means of targeted, usually simple, measurements.

Product

VELOCICALC Multi-Function Ventilation Meter

9565-X

-

TSI Inc.

9565-X - TSI Inc.

The portable, handheld VELOCICALC® Multi-Function Ventilation Meter 9565-X features a menu-driven user interface for easy operation in your local language. On-screen prompts and step-by-step instructions guide the user through instrument setup, operation, and field calibration. The 9565-X also features an ergonomic, overmolded case design with probe holder and a keypad lockout to prevent tampering during unattended use. The 9565-X does not include a probe or pressure sensor.

Product

Probe Station

ETCP1000

-

ECOPIA

ETCP1000 - ECOPIA

Installation of “Hot and cool chuck” - Sellectable chuck size : 4inch, 6inch. - Temperature variation : -193°C ~ 300°C (80K ~ 573K) - Additional requirements : Vacuum chamber, LN2 tank(Bombei), microscope, CCD camera, manipulators. - EPS500 is standard model in ETCP1000 probe station.

Product

Probes for Tube Inspection

-

Evident Scientific

Evident Scientific

Probes for tube inspection are lightweight but solidly constructed eddy current, remote field, magnetic flux leakage, and IRIS ultrasound. These probes are used for ferromagnetic or non-ferromagnetic tube inspection applications.

Product

ResMap or DualMap Auto Load Floor Standing

-

Creative Design Engineering, Inc.

Creative Design Engineering, Inc.

*Type: Floor Standing*Wafer load: FOUP LoadPort*Wafer size: 300mm, 8" and 300mmopen cassette with adapter*Mini Environment: yes*Probe Changer: 1,2 or 4 probes*Aligner: yes*Range: 1m/ to 10M/*Accuracy:0.5%*Repeatability: 0.02% *Static Repeatability: 0.1% dynamic

Product

High Impedance Active Probes

34A

-

Picoprobe

34A - Picoprobe

Engineered to meet the stringent demands of advanced high frequency circuit designers. This high impedance probe combines full DC capability, rise/fall times of 120 ps, and a nominal loading input impedance of 10 megohm shunted by 0.1 pf. Signal attenuation is 20:1 with a 50 ohm oscilloscope input.

Product

Dual Channel Temperature Internal/External

TGP-4510

-

Gemini Data Loggers Ltd.

TGP-4510 - Gemini Data Loggers Ltd.

This logger has an integral sensor and a connection for an external probe (not included) that makes the unit ideal for comparing ambient and process conditions.

Product

Vane Probe

AP472S2

-

Senseca

AP472S2 - Senseca

Vane probe ∅ 60 mm with handle to measure air speed in the range 0.5…20 m/s.

Product

Single Function Installation Testers

-

Seaward Electronic Ltd

Seaward Electronic Ltd

A handheld insulation resistance and continuity tester. Its unique integrated safety probe puts the LCD and test probe in the user's line of sight whilst making measurements.

Product

Computer Safe Automotive Logic Probe

TE6-0718

-

Hangzhou Tonny Electric & Tools Co., Ltd.

TE6-0718 - Hangzhou Tonny Electric & Tools Co., Ltd.

*For use on 6V, 12V and 24V DC systems*Tests high and low voltages on all vehicle circuits, including computerized engine and body controls*Dual color LED indicates red for power and green for ground

Product

Temperature Probe

-

Greenlee Tools

Greenlee Tools

*For surface and air/gas temperature measurement*Not suitable for liquids*Measurement range: -40°F to 399°F (-40°C to 204°C)*Probe length: 39.4 IN ±0.2IN (1 m ±5 mm)*Type K thermocouple*Lifetime Limited Warranty

Product

In-circuit Test

Medalist i1000 Systems

-

Keysight Technologies

Medalist i1000 Systems - Keysight Technologies

Cover Extend Technology (CET) is now supported on the Medalist i1000D. The i1000D only requires a VTEP MUX card to enable CET. If you are already using test fixtures with VTEP MUX cards , you can now implement CET without any fixture modification. Simply add new VTEP probes to devices that were previously not testable. This greatly reduces implementation efforts.

Product

Probe Accessories Kit

PK001

-

Teledyne LeCroy

PK001 - Teledyne LeCroy

Probe accessories are supplied as kits for the various probe models and can be purchased separately.The table below lists the contents of each kit and the probes with which it is compatible.

Product

SINGLE ENERGY IMPACT HAMMERS

-

Shenzhen Chuangxin Instruments Co., Ltd.

Shenzhen Chuangxin Instruments Co., Ltd.

It’s used to test the mechanical integrity of product enclosures and check the durability of enclosures for electrical appliances of other electrical appliances and other electronic products. If damage occurs from the Impact Hammer test, accessibility probes can be used to measure the extent or severity of the damage. The Impact Hammer simulates the mechanical impact to which electrical equipment maybe subjected.

Product

High Impedance Active Probes

7A

-

Picoprobe

7A - Picoprobe

An unterminated version, can be used for capacitance and resistance measurements or in low to medium speed signal applications where a 50 ohm termination is not required. A flexible coaxial cable length of 6 feet in length is standard on the Model 7A; however, when used for capacitance measurements, GGB Industries, Inc., recommends using a shorter 3 foot cable. If a shorter length of cable is desired for capacitance measurements, please specify it when ordering (Model 7A-3ft.). Please note that Model 7A uses Model 7 replacement tips.

Product

Climomaster Anemometer

6501 Series

-

KANOMAX USA, Inc.

6501 Series - KANOMAX USA, Inc.

The Climomaster anemometer is a research grade handheld hot-wire anemometer that promises level 2% m.v. accuracy, making it the most accurate hot-wire airflow meter in the world. It offers a ton of flexibility and options including 8 different probes types. These probes are all interchangeable and can be used with a single main unit without any additional calibration.

Product

Temperature and Humidity Regulator

H3061

-

COMET SYSTEM, s.r.o.

H3061 - COMET SYSTEM, s.r.o.

Relative humidity, temperature probe on a cable. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy.

Product

Coaxial Probes

-

Smiths Interconnect

Smiths Interconnect

Smiths Interconnect offers the industry's most extensive line of high reliability coaxial probes. Our coaxial probes provide a low noise, controlled impedance signal path with reliable and easy connect/disconnect options.

Product

Probe Configurations

EFP Series

-

MOHR Test and Measurement llc

EFP Series - MOHR Test and Measurement llc

Our probe template library lets us give you inexpensive customized probe configurations for every application. Give us your application dimensions and characteristics of the media you need to measure, and we will produce a customized solution made specifically to fit your needs.

Product

Bi Metal Thermometers

-

DeltaTRAK

DeltaTRAK

Bi-metal coil mechanismWaterproofField calibrateablePlastic probe cover with pocket clip